LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) >> Airbag Connector >> Procedure >> Airbag Control Module

Airbag Control Module

  1. How to disconnect:
    1. Push the lock lever plate (a).
    2. While holding down the lock lever plate (a), pull the lever toward you.
    G10270437Courtesy of SUBARU OF AMERICA, INC.
  2. How to separate:
    1. Remove the lock plate (a) behind the integrated connector.
    2. Release the lock levers of the connectors, and pull out the connectors.
    G11245769Courtesy of SUBARU OF AMERICA, INC.
  3. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Insert the connector and push the lock lever in securely.

scientia non olet · About LEMON Manuals