DTC B11F0: Disposal Process Complete

Diagnosis start condition:

When the ignition voltage is 10 V - 16 V.

DTC detecting condition:

Airbag disposal is completed with ISO collective disposal tool.

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to AIR BAG (DIAGNOSTICS)>General Description>CAUTION .

CHECK DTC .
Read the DTC of [Airbag] using the Subaru Select Monitor. Ref. to AIRBAG (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Is DTC B11F0 displayed? (Current malfunction)

Yes : Replace the airbag control module.

No : Using the Subaru Select Monitor, perform the clear memory of [Airbag]. Ref. to COMMON (DIAG)>CLEAR MEMORY .