Check Relay

WARNING: This page is about a different variant/trim than selected.

Check the resistance between relay terminals.

Terminal No.	Inspection conditions	Standard	Circuit
1-4	Always	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1-4	Apply battery voltage between terminals 2 and 3.	Less than 1 Ω	Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard	Circuit
1-2	Always	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1-4	Always	Less than 1 Ω
1-2	Apply battery voltage between terminals 3 and 5.	Less than 1 Ω.