Draining Fuel (With Other Than Subaru Select Monitor)
WARNING: This page is about a different variant/trim than selected.
WARNING:
Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
Be careful not to spill fuel.
NOTE:
If the fuel gauge indicates "F", refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (HEV))>FUEL>PROCEDURE>DRAINING FUEL PARTIALLY .
- Open the fuel filler lid and remove the fuel filler cap.NOTE: This operation is required to release the inner pressure of the fuel tank.
- Remove the fuel pump assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (HEV))>FUEL PUMP>REMOVAL .
- Drain the fuel from the fuel tank using the gasoline proof pump.CAUTION:
- Be careful not to spill fuel.
- Always collect fuel using a dedicated fuel container.
- Install the related parts in the reverse order after draining the fuel.NOTE: For information about connecting the quick connector on the fuel delivery tube, refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE D) .