Execution Condition
WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC METHOD 1 - EXECUTION CONDITION
| Secondary parameters | Execution condition | DTC |
|---|---|---|
| Battery voltage | 10.9 V or more | P015A or P015B |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more | |
| Duration of main feedback | 3000 ms or more | |
| Engine speed | 1000 rpm or more | |
| Amount of intake air | 15 g/s (0.53 oz/s) or more |
DIAGNOSTIC METHOD 2 - EXECUTION CONDITION
| Secondary parameters | Execution condition | DTC |
|---|---|---|
| Battery voltage | 10.9 V or more | P015A and P015B |
| Barometric pressure | 75.1 kPa (563 mmHg, | |
| Duration of main feedback | 22.2 inHg) or more 3000 ms or more | |
| Engine speed | 1000 rpm or more | |
| Amount of intake air | 20 g/s (0.71 oz/s) or more |