Diagnosis 2
WARNING: This page is about a different variant/trim than selected.
Detect the malfunction by the cumulative value obtained from the amount of variation in λ change.
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| Cumulative value obtained from the amount of variation in λ change | Less than value of Map | P014C and P014D |
MAP SPECIFICATION
| Cumulative value obtained from the amount of variation in λ | 0 | 0.5 | 5 |
| Cumulative value obtained from the amount of variation in λ change | 1 | 1.25 | 1.25 |
Time needed for diagnosis: 8 ms x 3750time(s)
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.