Inspection Mode 3
WARNING: This page is about a different variant/trim than selected.
| Code | Description & trouble part | Note |
|---|---|---|
| B1470 | A/C INVERTER HIGH VOLTAGE | - |
| B1471 | A/C INVERTER HIGH VOLTAGE OUTPUT | - |
| B1473 | A/C INVERTER HARDWARE | - |
| B1474 | A/C INVERTER TEMPERATURE | - |
| B1475 | A/C INVERTER LOAD | - |
| B1476 | A/C INVERTER LOW VOLTAGE | - |
| B1477 | A/C INVERTER LOCAL COMMUNICATION | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Air Conditioner]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Air Conditioner] to check that there is no DTC displayed. Ref. to AIR CONDITIONERS (DIAGNOSTICS) (HEV)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Turn to READY ON and leave unattended for 10 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Air Conditioner] to check that there is no DTC displayed. Ref. to AIR CONDITIONER (DIAGNOSTICS) (HEV)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.