Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| (1) - 1 Initial routine | ON |
| (1) - 2 Ignition switch | ON |
| (2) Ignition switch | ON |
| (3) Ignition switch | ON |
| (3) Battery voltage | 6.2V or more |
| (3) Electronic throttle control MOSFET | ON |
| (4) Ignition switch | ON |
| (5) Initial routine | ON |
| (6) ECM initialization | RUN |
| (7) Ignition switch | ON |