Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| (Open circuit) Signal of malfunction from fuel fill door lock solenoid relay driver IC As defined by: Measured solenoid relay voltage (+) 2.25 V or less Measured solenoid relay voltage (+) 1.25 V is exceeded (Short to ground) Signal of malfunction from fuel fill door lock solenoid relay |
ON |
| driver IC As defined by: Measured solenoid relay voltage (+) 0.65 V or less |
ON |
Time needed for diagnosis: 3000 ms
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.