LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Control System (Diagnostics) (HEV) (2 Of 4)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0461: Fuel Level Sensor "A" Circuit Range/Performance >> Notes

DTC P0461: Fuel Level Sensor "A" Circuit Range/Performance: Notes

WARNING: This page is about a different variant/trim than selected.

1. - 

DTC detecting condition:  Detected when two consecutive driving cycles with fault occur.

NOTE: After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DO (HEV))>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .
G13615333Courtesy of SUBARU OF AMERICA, INC.
  1. CHECK DTC  .

    Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine]. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .

    Is DTC other than P0461 displayed?

    Yes:  Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DO (HEV))>DIAGNOSTIC TROUBLE CODE (DTC) .

    No:  Replace the fuel level sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS). (H4DO (HEV))>FUEL LEVEL SENSOR .