Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition | ||
|---|---|---|---|
| Battery voltage | 10.9 V or more | ||
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more | ||
| Cumulative value of purge gas amount calculated from engine start (Duration of purge duty ratio = 0% Purge duty ratio from above) Ambient temperature | 20g (0.71 oz) or more(1) 2000 ms or more Other than 0% More than -25°C (-13°F) |
||
| Time when Evaporative Leak Check Module switching valve is closed Fuel tank pressure | Less than 20000 ms Less than 18.6 kPa | ||
|
|||