LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Control System (Diagnostics) (HEV) (2 Of 4)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0441: EVAP System (CPC) Incorrect Purge Flow >> General Description >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

Judge as NG when the following conditions are established.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Evaporative Leak Check Module pressure More than -400Pa (-3 mmHg, -0.1 inHg)
Purge gas amount integrated value 3g (0.11 oz) or more(1)
(1) : It is approximately 2 sec per the integration of purge to reach 1 g (0.04 oz) at vehicle speed of 64.4 km/h (40 MPH).

Time needed for diagnosis:  Less than 1 s

Malfunction indicator light illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.