LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Control System (Diagnostics) (HEV) (2 Of 4)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0304: Cylinder 4 Misfire Detected >> General Description >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

When a misfire occurs, the engine speed will decrease and the crankshaft position speed will change. Calculate the interval difference value (diagnostic value) from crankshaft position speed by the following formula, and judge whether a misfire is occurring or not comparing the calculated result with judgment value. Count the number of misfires, if the misfire ratio is higher during 1000 revs. or 200 revs., judge corresponding cylinders as NG.

Diagnostic value calculation (Calculate from angle speed) → Misfire detection in every single ignition (Compare diagnostic value with judgment value) → NG judgment (Misfire occurrence judgment required by the law) (Compare number of misfire with judgment value)
 
  • 180 Degree Interval Difference Method
  • 360 Degree Interval Difference Method
  • 720 Degree Interval Difference Method
  • NG judgment for exhaust gas misfire
  • NG judgment for catalyst-damaging misfire

As shown in the following figure, pick a cylinder as the standard and name it A. And the former crankshaft position speed is named B, the second former crankshaft position speed is named C, the third is named D etc.

G13615266Courtesy of SUBARU OF AMERICA, INC.
180° INTERVAL DIFFERENCE METHOD

Diagnostic value 180 degree interval difference = {(C - B) - (G - C)/4} - {(B - A) - (F - B)/4}
Judge as a misfire in the following cases.
  • 180 degree interval difference: More than judgment value of positive side
  • 180 degree interval difference: Judgment value of negative side or less (Diagnostic value before 180° CA)
G13615267Courtesy of SUBARU OF AMERICA, INC.
360° INTERVAL DIFFERENCE METHOD

Diagnostic value 360 degree interval difference = (B - A) - (D - C)
Misfire judgment 360 degree interval difference>Judgment value - Judged as misfire
G13615268Courtesy of SUBARU OF AMERICA, INC.
720° INTERVAL DIFFERENCE METHOD

Diagnostic value 720 degree interval difference = (B - A) - (F - E)
Misfire judgment 720 degree interval difference>Judgment value - Judged as misfire
G13615269Courtesy of SUBARU OF AMERICA, INC.
Malfunction Criteria Threshold Value
Diagnostic value of exhaust gas misfire 52 x 100/2000% or more in 1000 revs.

Time needed for diagnosis:  1000 engine revs.

Malfunction indicator light illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Catalyst-damaging misfire diagnostic value Value of Map2 or more
MAP SPECIFICATION 2

  Amount of intake air (g/rev (oz/rev))
  0.2 (0.01) 0.3 (0.01) 0.4 (0.01) 0.5 (0.02) 0.6 (0.02) 0.7 (0.02) 0.8 (0.03) 0.9 (0.03) 1 (0.04) 1.1 (0.04)
                   
   
0.2 (0.01) 0.3 (0.01) 0.4 (0.01) 0.5 (0.02) 0.6 (0.02) 0.7 (0.02) 0.8 (0.03) 0.9 (0.03) 1 (0.04) 1.1 (0.04)
Engine speed (rpm) 1000 80 80 80 80 80 80 80 66 66 66
1200 80 80 80 80 80 80 80 66 66 66
1600 80 80 80 80 80 66 66 57 57 57
2000 80 80 80 80 80 66 57 44 44 44
2400 80 80 80 80 80 57 44 36 30 30
2800 80 80 80 80 57 44 40 33 30 30
3200 80 80 80 80 57 44 40 30 30 30
3600 66 66 66 57 50 40 36 30 30 30
4000 57 57 50 50 44 36 30 28 28 28
4400 57 57 44 40 36 30 28 28 28 28
4800 50 50 40 36 33 30 28 26 25 25
5200 40 40 33 30 28 28 26 25 23 23
5600 33 33 28 26 25 25 23 22 21 21
5900 28 28 23 23 22 22 21 21 20 20
(g/rev)

Time needed for diagnosis:  200 engine revs.

Malfunction indicator light illumination:  Illuminates as soon as a malfunction occurs.