LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Emission Control Systems (Aux. Emission Control Devices) (HEV)) >> PCV Valve >> Installation

PCV Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply liquid gasket to the bolt threads of PCV valve, and install the PCV valve onto the cylinder block RH.
    NOTE: Before applying liquid gasket, degrease bolt threads of PCV valve and the mating surface of the cylinder block RH.

    Liquid gasket: 

    THREE BOND 1217G (Part No. K0877Y0100), THREE BOND 1217H or equivalent

    Tightening torque: 

    23 N.m (2.3 kgf-m, 17.0 ft-lb)

  2. Connect the PCV hose No. 1. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO (HEV))>PCV HOSE>INSTALLATION>PCV HOSE NO. 1 .
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE BOOT>INSTALLATION .
scientia non olet · About LEMON Manuals