LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Emission Control Systems (Aux. Emission Control Devices) (HEV)) >> PCV Connector >> Installation

PCV Connector: Installation

WARNING: This page is about a different variant/trim than selected.
  1. By using new O-rings, install the PCV connector, and connect the water hose and PCV hose No. 2.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the electric compressor assembly. Ref. to AIR CONDITIONER (HEV)>COMPRESSOR>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  4. Fill the engine coolant (engine side). Ref. to COOLING (H4DO (HEV))>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT>ENGINE SIDE .
scientia non olet · About LEMON Manuals