Execution Condition
WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS 1 - EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Elapsed time after ignition switch is turned to ON Soaking time Vacuum pump in the leak check valve assembly Switching valve in the leak check valve assembly Purge control |
500 ms or more and Less than 60000 ms 60s or more Not in operation Open Not in operation |
DIAGNOSIS 2 - EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Elapsed time after Auto Start Stop control Purge control |
5000 ms or more Not in operation |