Execution Condition

WARNING: This page is about a different variant/trim than selected.

Secondary parameters

Execution condition

Integrated time since compensation value status for each cylinder (refer to the Table) has turned to "In operation"⁽¹⁾

400time(s) (12.8 s) or more

⁽¹⁾	Time is calculated cumulatively. (If the secondary parameters are not satisfied for the compensation value status of each cylinder, the integrated time will not be reset.)

EXECUTION CONDITION (STATUS OF EACH CYLINDER CORRECTION VALUE)

Secondary parameters	Execution condition
Main feedback Engine speed Engine load Amount of intake air	In operation 1000 rpm - 4000 rpm 0.7 g/rev (0.02 oz/rev) or more 10 g/s (0.35 oz/s) or more
Or,
Main feedback Engine speed Engine load Amount of intake air	In operation 1000 rpm - 4000 rpm 0.6 g/rev (0.02 oz/rev) or more 20 g/s (0.71 oz/s) or more