LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Engine Control System (Diagnostics) (HEV) (3 Of 4)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P1620: No Engine Torque >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different variant/trim than selected.
Secondary parameters Execution condition
Engine speed 235 rpm or more
Fuel cut status Not performed
Battery voltage 10.9 V or more
Status of engine start command No start
from HV system command
Engine torque requested from Predetermined
HV system value or more
Remaining fuel level Predetermined value or more