LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Starting System & Charging System (HEV)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the connector and ground terminal.
    G13231372Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the 12V engine restart battery sensor.
CAUTION: The end of the bolt (a) of the 12V engine restart battery sensor is crimped. Therefore, do not loosen the nut (b) to the crimped portion.
G13231373Courtesy of SUBARU OF AMERICA, INC.
G13231374Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals