LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System (Diagnostics) (HEV) - Introduction) >> Warning Light Illumination Pattern >> Malfunction Indicator Light Does Not Come On

Malfunction Indicator Light Does Not Come On

WARNING: This page is about a different variant/trim than selected.

Trouble symptom: 

When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.

NOTE: For the diagnostic procedure, refer to Combination Meter service information. Ref. to COMBINATION METER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals