LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Plug-In Battery Charger (Diagnostics)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0D38-28: Hybrid/EV Battery Charger Input Current Sensor Circuit Signal Bias Level Out Of Range/Zero Adjustment Failure >> General Description >> Circuit Explanation

Circuit Explanation

WARNING: This page is about a different variant/trim than selected.

The Charge control ECU installed inside the Electric vehicle charger assembly uses an IAC sensor to monitor the input AC current. It outputs a DTC code when an IAC sensor error detected. If this DTC was detected, replace the Electric vehicle charger assembly.

For an explanation of the circuit, refer to DTC P0D3812. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0D3812 HYBRID/EV BATTERY CHARGER INPUT CURRENT SENSOR CIRCUIT CIRCUIT SHORT TO AUXILIARY BATTERY .

scientia non olet · About LEMON Manuals