DTC P0D38-12: Hybrid/EV Battery Charger Input Current Sensor Circuit Circuit Short To Auxiliary Battery: Notes
WARNING: This page is about a different variant/trim than selected.
Outline of diagnosis:
IAC sensor output voltage exceeded the threshold value.
(1 trip detection logic)
Trouble symptom:
Plug-in charging suspended
NOTE:
For the diagnostic procedure, refer to DTC P0D2A19. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0D2A19 HYBRID/EV BATTERY CHARGER INPUT CURRENT SENSOR CIRCUIT CIRCUIT CURRENT ABOVE THRESHOLD .