DTC P1CAD-49: Drive Motor "A" Position Sensor Internal Electronic Failure: Notes
WARNING: This page is about a different variant/trim than selected.
Detecting condition:
Motor resolver angle malfunction
When the difference between control resolver angle and estimated resolver angle is equal to or larger than the allowed value.
(1 trip detection logic)
Trouble symptom:
- Greatly reduced output power
- Driving in reverse not possible
- A driving range is limited
- Engine used while driving and engine speed becomes high
NOTE:
For the diagnostic procedure, refer to DTC P1C651F. Ref. to P-HEV DRIVE MOTOR (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P1C651F GENERATOR CONTROL MODULE CIRCUIT INTERMITTENT .