DTC P0E04-28: Generator Phase V Current Sensor Signal Bias Level Out Of Range/Zero Adjustment Failure: Notes
WARNING: This page is about a different variant/trim than selected.
Detecting condition:
Generator inverter current sensor V-phase offset malfunction
When the absolute value of the current sensor output exceeds the specified value while no current originally flows such as inverter shutdown
(1 trip detection logic)
Trouble symptom:
- Reduced output power
- A driving range is limited
- Engine always stopped
NOTE:
For the diagnostic procedure, refer to DTC P0E0028. Ref. to P-HEV DRIVE MOTOR (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0E0028 GENERATOR PHASE U CURRENT SENSOR SIGNAL BIAS LEVEL OUT OF RANGE/ZERO ADJUSTMENT FAILURE .