LEMON Manuals
: Even more car manuals for everyone
Home
>>
Subaru
>>
2020
>>
Crosstrek Base, Automatic CVT Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 14 (P-HEV Drive Motor System (Diagnostics))
>>
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
>>
DTC P0BE5-28: Drive Motor "A" Phase U Current Sensor Signal Bias Level Out Of Range/Zero Adjustment Failure
>>
General Description
>>
Component Operating Range
Component Operating Range
WARNING:
This page is about a different variant/trim than selected.
Motor generator control ECU
DTC P0BE6 (INF P0BE528) is not detected
DTC P0BEA (INF P0BE928) is not detected
DTC P0BEE (INF P0BED28) is not detected