Filler Neck
WARNING: This page is about a different variant/trim than selected.
- Install the filler neck with new O-rings.
Tightening torque:
7 N.m (0.7 kgf-m, 5.2 ft-lb)
- Install the water tank pipe cap, and connect the over flow hose (A).
- Install the collector cover. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>COLLECTOR COVER>INSTALLATION .
- Fill engine coolant. (Engine side) Ref. to COOLING (H4DO (HEV))>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT>ENGINE SIDE .