Radiator Fan and Fan Motor Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the clamp to the radiator fan shroud.
Install the main fan motor and the sub fan motor.
Tightening torque:

4.41 N.m (0.45 kgf-m, 3.25 ft-lb)
Install the radiator main fan and the radiator sub fan.
CAUTION: Use new nuts (with locking agent).

Tightening torque:

3.43 N.m (0.35 kgf-m, 2.53 ft-lb)
Install the main fan motor harness and the sub fan motor harness.
Install the over flow hose and the over flow pipe.