LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (HVAC System (Heater, Ventilator And A/C) (HEV)) >> Power Transistor >> Installation

Power Transistor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the power transistor.
  2. Install the heat pump Control Module. Ref. to AIR CONDITIONER (HEV)>CONTROL UNIT>INSTALLATION .
  3. Install the pocket assembly and the back panel - pocket. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>INSTALLATION .
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals