LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (HVAC System (Heater, Ventilator And A/C) (HEV)) >> Control Unit >> Removal >> Heat Pump Control Module

Heat Pump Control Module

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pocket assembly and the back panel - pocket. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL .
  3. Remove the heat pump Control Module.
    1. Disconnect the connector.
    2. Remove the nuts and remove the heat pump Control Module.
      G13234279Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals