LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (HVAC System (Heater, Ventilator And A/C) (HEV)) >> Compressor Oil >> Procedure

Compressor Oil: Procedure

WARNING: This page is about a different variant/trim than selected.
NOTE: Before making repairs, perform the oil return operation to return the compressor oil in circulation with the refrigerant to the compressor.
  1. Turn to READY ON.
  2. Turn the A/C switch to ON.
  3. Turn the temperature control dial to HI (MAX HEAT).
  4. Turn the FRESH/RECIRC switch to RECIRC position.
  5. Turn the fan dial to HI (MAX).
  6. Leave in EV conditions (engine stopped) for 10 minutes.
scientia non olet · About LEMON Manuals