LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Manual Transaxle & Differential (5MT)) >> Transfer Driven Gear >> Inspection

Transfer Driven Gear: Inspection

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Taper roller bearing

    Replace the bearings in the following cases.

    • In case of broken or rusty bearings
    • In case of worn or damaged bearings
    • When the bearings fail to turn smoothly or emit noise in rotation after transmission gear oil has been applied.
  2. Transfer driven gear

    If the tooth face of driven gear and the shaft are excessively broken or damaged, replace the driven gear.

scientia non olet · About LEMON Manuals