Extension Case
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new oil seal to the extension case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>OIL SEAL>REPLACEMENT .
- Install the dust cover.
- Install the shift bracket.
Tightening torque:
24.5 N.m (2.5 kgf-m, 18.1 ft-lb)
- Install the transfer drive gear to the extension case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>TRANSFER DRIVE GEAR>INSTALLATION .