Back-Up Light Switch
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to OFF.
- Disconnect the back light switch connector.
- Measure the resistance between the back-up light switch terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Gear shift position |
Terminal No. |
Standard |
| Reverse position |
1 and 2 |
Less than 1 Ω |
| Other positions |
1 MΩ or more |
- Replace faulty parts.