Reverse Idler Gear: Adjustment
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Select the appropriate reverse shifter lever from the table below, and adjust the clearance A between the reverse idler gear and transmission case wall.
Specification:
6.0 - 7.5 mm (0.236 - 0.295 in)
Reverse shifter lever Part No. Mark Content 32820AA070 7 Far from case wall 32820AA080 8 Specification 32820AA090 9 Closer to case wall - Select the appropriate adjusting washer from the table below, and adjust the clearance between the reverse idler gear and transmission case wall.
Specification:
0 - 0.5 mm (0 - 0.020 in)
| Adjusting washer | |
|---|---|
| Part No. | Thickness mm (in) |
| 803020151 | 0.4 (0.016) |
| 803020152 | 1.1 (0.043) |
| 803020153 | 1.5 (0.059) |
| 803020154 | 1.9 (0.075) |
| 803020155 | 2.3 (0.091) |