Reverse Check Plate Adjustment
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Shift the shifter arm to "5th" and then to reverse to see if the reverse check mechanism operates properly.
- Also check to see if the arm returns to neutral when released from the reverse position. If the arm does not return properly, replace the reverse check plate.
| Reverse check plate | |||
|---|---|---|---|
| Part No. | (A): No. | Angle |
Content |
| 32189AA001 | 0 | 28° | Arm stops closer to 5th gear. |
| 32189AA011 | 1 | 31° | Arm stops closer to 5th gear. |
| 32189AA021 | 2 | 34° | Arm stops in the center. |
| 32189AA031 | 3 | 37° | Arm stops closer to reverse gear. |
| 32189AA041 | 4 | 40° | Arm stops closer to reverse gear. |