LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Manual Transaxle & Differential (5MT)) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the differential side retainers using the ST (WRENCH COMPL RETAINER).
  2. Install the taper roller bearing outer race to the transmission case.
  3. Install the front differential assembly.
    CAUTION: Be careful not to bend the seal lips of oil seal.
    G08318991Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>MAIN SHAFT ASSEMBLY>INSTALLATION .
  5. Install the drive pinion shaft assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>DRIVE PINION SHAFT ASSEMBLY>INSTALLATION .
  6. Install the transmission case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>TRANSMISSION CASE>INSTALLATION .
  7. Install the transfer case together with the extension case assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>TRANSFER CASE AND EXTENSION CASE ASSEMBLY>INSTALLATION .
  8. Install the manual transmission assembly to the vehicle. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals