LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and warm up the engine.
  2. Depress the brake pedal, and shift the select lever to "D" range.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is idling. Refer to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR>OPERATION .

    Standard 

    Approx. 0.8 V

  6. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. Refer to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR>OPERATION .

    Specification: 

    Approx. 0.5 V

scientia non olet · About LEMON Manuals