LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Oil Pan And Strainer >> Removal

Oil Pan And Strainer: Removal

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.
  • Be careful not to spill CVTF on the exhaust pipe to prevent it from emitting smoke or causing a fire. If the CVTF adheres, wipe it off completely.
  1. Lift up the vehicle.
  2. Clean the transmission exterior.
  3. Remove the CVTF drain plug to drain CVTF.
  4. Remove the oil pan.
    CAUTION: Be careful not to allow foreign matter such as dust or dirt to enter the oil pan.
    G10218600Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the magnet.
  6. Remove the oil strainer.
    G10218601Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the O-ring from oil strainer.
    G10218602Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals