LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Drive Plate >> Removal

Drive Plate: Removal

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>AUTOMATIC TRANSMISSION ASSEMBLY>REMOVAL .
  2. Set the ST, and then remove the reinforcement drive plate, drive plate and crankshaft position sensor plate.

    Preparation tool: 

    ST: CRANKSHAFT STOPPER (498497300)

    G13225791Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals