Drive Pinion Shaft Assembly: Inspection
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure that all component parts are free of scratches, holes and other faults.
- Check the tooth contact. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 IMPREZA)>DRIVE PINION SHAFT ASSEMBLY>ADJUSTMENT .
- Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.
- Check the starting torque of drive pinion shaft.CAUTION: Before measuring, apply differential gear oil to roller of bearing and rotate the bearing several times.
Preparation tool:
ST1: HOLDER (498937110)
ST2: WRENCH (499787700)
Starting torque:
5.1 - 17.1 N (0.5 - 1.7 kgf, 1.1 - 3.8 lbf)