Converter Case: Assembly
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oil drain plug.
Tightening torque:
70 N.m (7.1 kgf-m, 51.6 ft-lb)
- Install the overflow drain plug.NOTE: Overflow plug of differential gear oil is temporarily attached.
- Install all plugs.NOTE: Use new O-rings.
Tightening torque:
T1: 22 N.m (2.2 kgf-m, 16.2 ft-lb)
T2: 22.5 N.m (2.3 kgf-m, 16.6 ft-lb)
- Install the pitching stopper bracket.NOTE: Tighten the bolt side while holding the nut side.
Tightening torque:
41 N.m (4.2 kgf-m, 30.2 ft-lb)