Inspection Mode B
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Condition |
|---|---|---|
| P0711 | TRANSMISSION FLUID TEMPERATURE SENSOR "A" CIRCUIT RANGE/PERFORMANCE | - |
Diagnostic procedure:
- Start the engine under condition that ATF temperature is at 20°C (68°F) or below.
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>ALL READINESS DIAGNOSTIC CODE(S) .
- Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)NOTE: Repeat two or more driving cycles in this driving pattern.
- Check the readiness code using Subaru Select Monitor, confirm that the diagnosis is completed, and end the procedure.