LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Transaxle (Diagnostics) (IMPREZA)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P2747: Intermediate Shaft Speed Sensor "B" Circuit No Signal >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Secondary parameters Execution condition
12 V battery system voltage 9 V or more
Measured secondary pulley shaft speed 500 rpm or more
scientia non olet · About LEMON Manuals