Execution Condition
WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| Secondary parameters | Execution condition |
|---|---|
| Diagnosis 1 | |
| 12 V battery system voltage | 10 V or more |
| Transmission range | Drive |
| Measured turbine shaft speed | 100 rpm or more |
| Measured primary pulley shaft speed | 100 rpm or more |
| Commanded forward & reverse clutch pressure control solenoid current | Less than 0.9 A. |
| Engine speed | 400 rpm or more |
| Diagnosis 2 | |
| 12 V battery system voltage | 10 V or more |
| Transmission range | Drive |
| Measured primary pulley shaft speed | Less than 100 rpm |
| Commanded forward & reverse clutch pressure control solenoid current | Less than 0.9 A |
| Accelerator pedal position (from ECM) | Exceeds 6% |
| Engine speed | 400 rpm or more |