LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (OEM Wiring Diagrams W/ Connector End Views & Fuse/Relay Locations) >> Basic Diagnostic Procedure >> Basic Procedures >> Identification Of Trouble Cause

Identification Of Trouble Cause

WARNING: This page is about a different car, the 2020 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the diagnostics, narrow down the causes.
  2. Refer to the wiring diagram and check the system's circuit. If necessary, use a voltmeter, ohmmeter, etc.
  3. Before replacing component parts, check for fuse blowout, open wiring harness on the power supply circuit and the ground circuit, and poor connectors, switches, relays, etc. If no problem is encountered, check the component parts.