LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Engine Starting System & Charging System (Except For HEV) >> Battery >> Removal

Engine Starting System & Charging System (Except For HEV): Battery: Removal

  1. Disconnect the ground terminal from 12V engine restart battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector from 12V engine restart battery sensor. (When the battery is not replaced)
  3. Remove the 12V engine restart battery sensor. (When replacing the battery) Ref. to STARTING/CHARGING SYSTEMS (H4DO (EXCEPT FOR HEV))>BATTERY SENSOR>REMOVAL .
  4. Disconnect the positive terminal of battery.
  5. Remove the battery cable holder.
  6. Remove the battery holder.
    G11253754Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the battery.
scientia non olet · About LEMON Manuals