LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> V-Belt >> Installation >> Hybrid Model >> Idler Pulley

Idler Pulley

  1. Install the idler pulley.
    NOTE: When installing the idler pulley, be careful of the idler pulley cover direction.
    G13600717Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    36 N.m (3.7 kgf-m, 26.6 ft-lb)

  2. Install the V-belts. Refer to MECHANICAL (H4DO (EXCEPT FOR HEV))>V-BELT>INSTALLATION>HYBRID MODEL>V-BELT .
scientia non olet · About LEMON Manuals