LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (Except For HEV) >> Water Pump >> Installation >> Water Pump Pulley

Water Pump Pulley

  1. Using the ST1 and ST2, install the water pump pulley.

    Preparation tool: 

    ST1: PULLEY WRENCH (18355AA000)

    ST2: PULLEY WRENCH PIN SET (18334AA020)

    Tightening torque: 

    14 N.m (1.4 kgf-m, 10.3 ft-lb)

  2. Install the V-belts. Ref. to MECHANICAL (H4DO (EXCEPT FOR HEV))>V-BELT>INSTALLATION>EXCEPT FOR HYBRID MODEL .
scientia non olet · About LEMON Manuals