Engine Cooling System (Except For HEV): General Description: Specification
| Cooling system | Electric fan + Forced engine coolant circulation system | |||
|---|---|---|---|---|
| Total engine coolant capacity L (US qt, Imp qt) | CVT model | Approx. 7.8 (8.2, 6.9) | ||
| MT model | Approx. 7.6 (8.0, 6.7) | |||
| Water pump | Type | Centrifugal impeller type | ||
| Pump characteristics | Discharge rate L (US gal, Imp gal)/min | 214 (56.5, 47.1) or more | ||
| Engine coolant temperature °C (°F) | 80 (176) | |||
| Engine coolant concentration % | 50 | |||
| System pressure kPa (mAq) | 88 (9.0) | |||
| Pump speed | r/min 8, 580 | |||
| Impeller diameter mm (in) | 56 (2.20) | |||
| Number of impeller vanes pcs. | 7 | |||
| Pump pulley effective diameter mm (in) | 100 (3.94) | |||
| Thermostat | Type | Wax pellet type | ||
| Starting temperature to open °C (°F) | Engine side | 90 - 94 (194 - 201) | ||
| Water tank pipe side | 48 - 52 (118 - 126) | |||
| Full open temperature °C (°F) | Engine side | 100 (212) | ||
| Water tank pipe side | 63 (145) | |||
| Valve lift mm (in) | Engine side | 8.0 (0.315) or more | ||
| Water tank pipe side | 6.0 (0.236) or more | |||
| Valve opening size mm (in) | Engine side | 32 (1.26) | ||
| Water tank pipe side | 22 (0.87) | |||
| Radiator fan | Motor input W | Main fan | 120 | |
| Sub fan | 120 | |||
| Fan outer diameter mm (in) | Main fan | 300 (11.8) | ||
| Sub fan | 300 (11.8) | |||
| Number of fan blades pcs. | Main fan | 9 | ||
| Sub fan | 11 | |||
| Radiator | Type | Side flow, pressure type | ||
| Core dimensions mm (in) | Width x Height x Thickness | 660 x 373.3 x 12.1 (25.98 x 14.70 x 0.48) | ||
| Pressure range in which cap valve is open kPa (kg/cm2 , psi) | Positive pressure side | Standard | 93 - 123 (0.95 - 1.25, 14 - 18) | |
| Limit | 83 (0.85, 12) | |||
| Negative pressure side | Standard | -1.0 - -4.9 or less (-0.01 - -0.05, -0.1 - -0.7) |
||
| Fin shape | Corrugated fin | |||
| Water tank pipe | Pressure range in which cap valve is open kPa (kg/cm2 , psi) | Positive pressure side | Standard | 122 - 152 (1.24 - 1.55, 18 - 22) |
| Limit | 112 (1.14, 16) | |||
| Reservoir tank | Capacity L (US qt, Imp qt) | 0.45 (0.476, 0.396) | ||
Engine coolant:
Refer to "RECOMMENDED MATERIALS" for engine coolant. Ref. to RECOMMENDED MATERIALS .