DTC B1401: Meter Collation

Diagnosis start condition:

Battery voltage is 10 V or more.
The remote engine starter was not used to start the engine.

DTC detecting condition:

Reference code incompatibility between combination meter and body integrated unit

Trouble symptom:

Engine will not start.
The security indicator illuminates.

CAUTION: When the combination meter is replaced, registration of the immobilizer system is required. For details, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.

CHECK COMBINATION METER REGISTRATION .
Perform registration of combination meter. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.

Is registration complete?

Yes : Currently, it is normal. (Combination meter registration is not complete.)

No : Refer to "Correspondence table when registration is not possible" in the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. If the registration still does not work properly, replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .